BCHCP - V40006,GLOSS URETHANE VARNISH

  • MSDS: BCHCP
  • Manufacturer: THE VALSPAR CORP
  • Product Name: V40006,GLOSS URETHANE VARNISH
  • National Stock Number: 8010-00N001137
Product Identification

Product ID:V40006,GLOSS URETHANE VARNISH
MSDS Date:01/01/1985
FSC:8010
NIIN:00N001137
MSDS Number: BCHCP

Responsible Party
THE VALSPAR CORP
1101 THIRD ST S
MINNEAPOLIS, MN 55415-1211
US

Emergency Phone: 612-332-7371

Info Phone: 612-332-7371

Cage: GO944

Contractor
VALSPAR CORPORATION
MINNEAPOLIS, MN 55415 US

Telephone: 612-332-7371/888-345-5732

Cage: 23526

Ingredients

SOYA ALKYD RESIN

Fraction By Weight: 14.9%


RULE 66 MINERAL SPIRITS (ALIPHATIC HYDROCARBONS)

Fraction By Weight: 50.8%


GLYCOL ETHER

CAS: 111-46-6

RTECS: ID5950000

Fraction By Weight: 1.9%


AROMATIC HYDROCARBONS

Fraction By Weight: 1.8%


SOYA MODIFIED POLYURETHANE RESIN (TYPE 1)

Fraction By Weight: 30.5%

Hazards

Effects of Overexposure:SKIN/EYE: IRRITATION. INHALATION:
ANESTHETIC,IRRIT RESP TRACT,CNS DEPRESS,HEADACHE,DIZZY,COMA,NAUSEA

First Aid

First Aid:EYE: FLUSH WITH WATER 15 MIN,NOTIFY PHYSICIAN. SKIN: WASH
WITH SOAP AND WATER,APPLY SKIN CREAM. INHALATION: REMOVE FROM
EXPOSURE,RESTORE BREATHING,NOTIFY PHYSICIAN.

Fire Fighting

Flash Point:103F/39C
Lower Limits:0.7
Extinguishing Media:WATER SPRAY,CO2,FOAM,DRY CHEMICAL
Fire Fighting Procedures:SELF-CONT BREATH APP
Unusual Fire/Explosion Hazard:CLOSED CONTAINERS MAY EXPLODE DUE TO
PRESSURE BUILD-UP WHEN EXPOSED TO HEAT OR FLAME

Accidental Release

Spill Release Procedures:REMOVE ALL SOURCES OF IGNITION,FLAMES,HOT
SURFACES & ELECTRICAL STATIC OR FRICTIONAL SPARKS. AVOID BREATHING
VAPORS,VENTILATE AREA. REMOVE WITH INERT ABSORBENT AND NON-SPARKING
TOOLS

Handling

Handling and Storage Precautions:DO NOT STORE ABOVE 120F. STORAGE
BUILDING DESIGN CONFORM TO REQUIREMENTS OF NFPA CLASS 1A LIQUIDS
Other Precautions:DO NOT USE NEAR OPEN FLAME,TAKE INTERNALLY OR BREATH
VAPORS. CLOSE CONTAINER AFTER EACH USE.

Exposure Controls

Respiratory Protection:NIOSH/MSHA APPROVED RESP DEVICE IN ACCORD WITH
EXPOSURE OF CONCERN
Ventilation:LOCAL/MECHANICAL,USE EXPLOSION PROOF MOTORS.
Protective Gloves:RUBBER
Eye Protection:SAFETY GLASSES/GOGGLES
Other Protective Equipment:AS REQUIRED TO PREVENT SKIN CONTACT.
Supplemental Safety and Health
ADD INGRED: ADDITIVES 0.1%

Chemical Properties

Boiling Pt:B.P. Text:280F/137C
Vapor Density:>1
Evaporation Rate & Reference:<1 (ETHER)

Stability

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS
Stability Condition to Avoid:HEAT,SPARKS & OPEN FLAMES
Hazardous Decomposition Products:CARBON MONOXIDE,FROM THERMAL DECOMP

Disposal

Waste Disposal Methods:DISPOSE OF IN ACCORDANCE TO LOCAL,STATE AND
FEDERAL REGULATIONS. DO NOT INCINERATE CLOSED CONTAINERS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.